The Dot is a tapered round planter from Crescent offered in three sizes, 16", 20" and 26". This planter is part of the TruDrop® range offering a self-watering reservoir system.
- Easy installation due to lightweight
- Crack-proof - extremely resistant resin providing years of enjoyment
- Weather-Proof - will not crack in winter or fade in summer
- TruDrop Reservoir System
- Double Walled - offering excellent durability and an insulative quality plants love
- Matching saucers available for most planters
If planters are used indoors, adding a Threaded Pipe Insert to each planter prior to planting and watering, can make it easy to drain when it is necessary to move the planters. You need one Pipe Insert per planter and only one Quick Connect.
| Item # |
Description |
Outside Top |
Outside Bottom |
Outside Height |
Saucer # |
Soil Capacity Gallon |
Water Capacity Gallon |
| A5940 |
16" Dot |
16" |
9.8" |
16" |
A9910 |
3.59 |
2.14 |
| A5950 |
20" Dot |
20" |
12.28" |
20.04" |
A9913 |
7.36 |
5.42 |
| A5965 |
26" Dot |
26" |
15.96" |
26.04" |
A9918 |
19.59 |
12.8 |
Watch a video on how the TruDrop System works. Instructions.
The Crescent TruDrop® reservoir system is a simple solution that will extend time between watering for up to 6 weeks depending on planter size and weather conditions. Each planter comes with an easy-to-read water gauge that alerts you to how much water your container has. The benefit of watering from underneath diminishes risk of fungus growth and leaf damage allowing you to grow healthier plants.
This efficient system uses less water, prevents fertilizer run-off and, as with all Crescent planters, the planter itself is made from 100% recyclable material with a 10-year limited warranty.
What is resin?
Crescent planters are crafted with rotational molding, commonly referred to as "rotomolding." This is a plastic casting technique used to produce large hollow, seamless, and double-walled parts. It is a three-stage process that involves a mold on a rotating frame, a heating chamber, and a cooling chamber. Molds for the rotomolding process are specially designed and are capable of producing single and double wall products. Finish can vary from batch to batch.
